Accidental release of hazardous gases: modelling and assessing risk

The renewed concern in assessing risks and consequences from technological hazards in industrial and urban areas continues emphasizing the development of local-scale consequence analysis (CA) modelling tools able to predict shortterm pollution episodes and exposure effects on humans and the environment in case of accident with hazardous gases (hazmat). In this context, the main objective of this thesis is the development and validation of the EFfects of Released Hazardous gAses (EFRHA) model. This modelling tool is designed to simulate the outflow and atmospheric dispersion of heavy and passive hazmat gases in complex and build-up areas, and to estimate the exposure consequences of short-term pollution episodes in accordance to regulatory/safety threshold limits. Five main modules comprising up-to-date methods constitute the model: meteorological, terrain, source term, dispersion, and effects modules. Different initial physical states accident scenarios can be examined. Considered the main core of the developed tool, the dispersion module comprises a shallow layer modelling approach capable to account the main influence of obstacles during the hazmat gas dispersion phenomena. Model validation includes qualitative and quantitative analyses of main outputs by the comparison of modelled results against measurements and/or modelled databases. The preliminary analysis of meteorological and source term modules against modelled outputs from extensively validated models shows the consistent description of ambient conditions and the variation of the hazmat gas release. Dispersion is compared against measurements observations in obstructed and unobstructed areas for different release and dispersion scenarios. From the performance validation exercise, acceptable agreement was obtained, showing the reasonable numerical representation of measured features. In general, quality metrics are within or close to the acceptance limits recommended for ‘non-CFD models’, demonstrating its capability to reasonably predict hazmat gases accidental release and atmospheric dispersion in industrial and urban areas. EFRHA model was also applied to a particular case study, the Estarreja Chemical Complex (ECC), for a set of accidental release scenarios within a CA scope. The results show the magnitude of potential effects on the surrounding populated area and influence of the type of accident and the environment on the main outputs. Overall the present thesis shows that EFRHA model can be used as a straightforward tool to support CA studies in the scope of training and planning, but also, to support decision and emergency response in case of hazmat gases accidental release in industrial and built-up areas.

Hidrogeomorfologia e sustentabilidade de recursos hídricos subterrâneos

A água subterrânea de rochas duras é uma fonte importante para fins domésticos, industriais e agrícolas e mesmo para o consumo humano. A geologia, a tectónica, a geomorfologia e as características hidrológicas controlam o fluxo, ocorrência e armazenamento das águas subterrâneas. A disponibilidade da água subterrânea no meio geológico está totalmente dependente das áreas de recarga e de descarga numa determinada bacia. A precipitação é a principal fonte de recarga em aquíferos descontínuos, enquanto que a descarga depende dos declives do terreno e dos gradientes do nível hidrostático e ainda das condições hidrogeológicas do solo. A hidrogeomorfologia é um domínio interdisciplinar emergente, que estuda as relações entre as unidades geomorfológicas e o regime das águas superficiais e subterrâneas de uma determinada área. A compreensão do papel da geomorfologia é essencial para avaliar de forma rigorosa os sistemas hidrogeológicos e os recursos hídricos. Os dados de detecção remota providenciam uma informação espacial valiosa e actualizada da superfície terrestre e dos recursos naturais. Os recentes avanços tecnológicos colocaram as técnicas de detecção remota e os sistemas de informação geográfica (SIG) numa posição cimeira como ferramentas de gestão metodológica. Foi criada, em ambiente SIG, uma base de geo-dados, essencialmente derivada da detecção remota, da cartografia e do trabalho de campo. Esta base de dados, organizada em diferentes níveis de informação, inclui uma avaliação principalmente focalizada no uso do solo, climatologia, declives, geologia, geomorfologia e hidrogeologia. No presente estudo foram cruzados diversos níveis de informação, com a geração de múltiplos mapas temáticos para atingir um quadro integrado dos diversos sectores no Norte e Centro de Portugal. Os sectores em estudo (Caldas da Cavaca, Termas de Entre-os-Rios, Águas de Arouca e Águas do Alardo) estão localizados em sistemas hidrogeológicos predominantemente constituídos por rochas graníticas, por vezes intersectadas por filões de quartzo, aplito-pegmatíticos e doleríticos. Para apoiar a elaboração dos mapas hidrogeomorfológicos foi criada uma base SIG, contendo diversa informação, nomeadamente topografia, hidrografia, litologia, tectónica, morfoestrutura, hidrogeologia, geofísica e uso do solo. Além disso, foram realizadas várias campanhas de campo, as quais permitiram: o estabelecimento dum mapeamento geológico, geomorfológico e hidrogeológico; a caracterização in situ do grau de alteração, resistência e grau de fracturação dos maciços rochosos; o desenvolvimento de um inventário hidrogeológico em conjunto com alguns ensaios expeditos in situ. A interligação entre os parâmetros geomorfológicos, hidrológicos e hidrogeológicos dos sistemas de água subterrânea “normal” e hidromineral destaca a importância de uma cartografia e duma modelação conceptual hidrogeomorfológica. Além disso, contribuirá para um melhor apoio à decisão na gestão sustentável dos recursos hídricos.

Modeling the Western Iberian margin circulation: present and future

The purpose of this work is to carry out a comprehensive study on the Western Iberian Margin (WIM) circulation my means of numerical modeling, and to postulate what this circulation will be in the future. The adopted approach was the development of a regional ocean model configuration with high resolution, capable of reproducing the largeand small-scale dynamics of the coastal transition zone. Four numerical experiences were carried out according to these objectives: (1) a climatological run, in order to study the system’s seasonal behavior and its mean state; (2) a run forced with real winds and fluxes for period 2001-2011 in order to study the interannual variability of the system; (3) a run forced with mean fields from Global Climate Models (GCMs) for the present, in order to validate GCMs as adequate forcing for regional ocean modeling; (4) a similar run (3) for period 2071-2100, in order to assess possible consequences of a future climate scenario on the hydrography and dynamics of the WIM. Furthermore, two Lagrangian particle studies were carried out: one in order to trace the origin of the upwelled waters along the WIM; the other in order to portrait the patterns of larval dispersal, accumulation and connectivity. The numerical configuration proved to be adequate in the reproduction of the system’s mean state, seasonal characterization and an interannual variability study. There is prevalence of poleward flow at the slope, which coexists with the upwelling jet during summer, although there is evidence of its shifting offshore, and which is associated with the Mediterranean Water flow at deeper levels, suggesting a barotropic character. From the future climate scenario essay, the following conclusions were drawn: there is general warming and freshening of upper level waters; there is still poleward tendency, and despite the upwellingfavorable winds strengthening in summer the respective coastal band becomes more restricted in width and depth. In what concerns larval connectivity and dispersion along the WIM, diel vertical migration was observed to increase recruitment throughout the domain, and while smooth coastlines are better suppliers, there is higher accumulation where the topography is rougher.

Nanocomposites as probes for biodetection by SERS

The present work aimed to explore the potential of new nanocomposites based on carbon nanostructures and metal nanoparticles for the detection of biomolecules through surface enhanced Raman scattering (SERS). In a first step, polyvinyl alcohol composites were prepared incorporating silver nanoparticles by two different reduction procedures. At first without introduction of carbon nanostructures. These composites showed good results for the SERS identification of nucleic acids. Next, the synthesis and characterization of graphene oxide was studied to be used in the preparation of silver and gold nanocomposites. The reduction of this nanomaterial with different chemical agents was explored, since its reduction degree may be a determinant factor for the application envisaged (biomolecules interaction). The preparation of the nanocomposites with silver and gold was performed with different reducing agents. The SERS activity of these new nanocomposites was then explored in the presence of different analytes, varying the experimental conditions for Raman spectra acquisition. It was interesting to verify that the silver containing nanocomposites presented the particularity to intensify the graphene D and G bands. It is also important to highlight that a new eco-friendly reducing agent was tested for the synthesis of the graphene oxide composites, an Eucalyptus Globulus extract. Other variable introduced was the preparation of gold nanostars synthesized with hydroxylamine in the presence of graphene oxide, which allowed the preparation of a new nanocomposite with SERS potential. Fibrous membranes were also prepared by electrospinning with the aim to prepare SERS supports with adequate topography and porosity for the formation of nanoparticles agglomerates for the creation of the so-called hot-spots and also to allow the penetration of the analyte molecules. The polymers polyvinyl alcohol and polyacrylonitrile were selected for electrospinning. Using this technique, electrospun mantles with silver and gold nanoparticles and nanocomposites were prepared. Several variables were studied, such as the introduction of the nano-fillers during the electrospinning process, later deposition of the nano-fillers on the simple electrospun polymeric fibres and surface functionalization of the simple polymeric membranes to link the nano-fillers. At last, the potentialities of using carbon nanotubes forests, produced by chemical vapor deposition and coated with gold film by sputtering, as new SERS substrates were explored. It was found that the SERS detection of DNA bases and ADN itself is possible using these substrates.